316 Hot Rolled Stainless Steel Plate From Chnia Supplier
|FOB Price:||US $1,500-3,000 / Ton|
|Min. Order:||1 Ton|
|Min. Order||FOB Price|
|1 Ton||US $1,500-3,000/ Ton|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram|
- Model NO.: 316
- Standard: ASTM, AISI, GB, JIS, DIN, EN
- Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS
- Technique: Hot Rolled Cold Rolled
- Width: 1000-1500mm
- Surface: Ba,Hl,4k,8k,No.1
- Transport Package: Box, Iron Box as Per Customers′ Requirements
- Origin: China
- Type: Stainless Steel Sheets
- Grade: 300 Series
- Shape: Flat
- Surface Treatment: 2b, Ba, No. 1, No. 4, No. 8, 8k, Hl, etc
- Length: 1000-6000mm
- Trademark: LCSH
- Specification: 304, 316.304L, 316L
1)316 stainless steel. Features
Add Mo, corrosion resistance, resistance to atmospheric corrosion and high temperature strength of good, available for use under harsh conditions; Work hardening (non-magnetic) from high strength good; No magnetic solid solution State; Cold-rolled product outward appearance gloss, beautiful;
Add Mo 316 stainless steel elements, making it resistant to corrosion, high temperature strength and improvement of teaching, high temperature resistance up to 1200-1300, you can use under harsh conditions
2)Use: Water equipment, chemicals, dyes, paper, oxalic acid, fertilizers and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts
3)316 stainless steel chemical compositions: C ≤ 0.08, Si ≤ 1.00, Mn ≤ 2.00, P ≤ 0.035, S ≤ 0.03, Ni: 10.0-14.0, Cr: 16.0-18.5, Mo: 2.0-3.0.
4)Mechanical properties of type 316 stainless steel, tensile strength (Mpa) 620 MIN, yield strength (Mpa) 310 MIN, elongation (%) 30 MIN, size reduction (%) Density of 8.03 g/cm3 40 MIN, 316 stainless steel, austenitic stainless steels are generally the value.
5)316 stainless steel plate specifications:
Width: 1M-3M (width: 1000mm, 1220mm, 1250mm, 1500mm, 1800mm, 2000mm),
Length of 1m-20m
6)Package: Standard export seaworthy packing
Company purpose: To provide buyers with the best quality products, best service, best price...If you need any, pls contact us. No inquiry is too large or too small, so call us today for a quote!
Finishing method and degree of finish
|Hot rolled annealed and descaled. Condition and finish commonly preferred for corrosion resisting and|
most heat resisting applications.
|A bright, moderately reflective cold rolled finish with the annealed and descaled coil receiving a final light|
roll pass through polished rolls
This is the general purpose cold rolled finish that can be used as is, or a s a preliminary step to polishing
. 2B is the most commonly used surface finish.
|A bright annealed finish approaches a mirror-like appearance. It is produced by cold rolling, then annealing|
in a controlled atomosphere furnace. The
final appearance is developed by a single light skin pass through a cold mill over highly polished rolls,
but is also dependent on additional millwork, such as grinding the surface at an intermediate gauge.
|No. 4 finish is a general-purpose polished finish widely used for restaurant equipment, kitchen equipmenu,|
shop fronts and dairy equipment. Following initial grinding with coarser abrasives, final finishing generally
is done with abrasives having a particle size of approximately 150 to 180 mesh.
|HL||Special polished finish is achieved by polish belts orbrushed. It is un-direction and non-reflective, and|
suitable for internal architecture applications
|No. 8 finish, the most reflective finish that is commonly produced on sheet, is obtained by polishing|
with successively finer abrasives and buffing extensively with very fine rouges. The surface is
essentially free of grit lines from preliminary grinding operations. No. 8 finish is most widely used
for architectural parts, small mirrous and reflectors and for press plates.